Subscribe to Our Youtube Channel
Related Manuals for Clarke BRONCO 2 OIL FREE
Summary of Contents for Clarke BRONCO 2 OIL FREE
- Page 1 BRONCO 2 OIL FREE BRONCO 2 OIL FREE AIR COMPRESSOR AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS 0903...
- Page 2 PARTS DIAGRAM (Compressor) Parts Diagram - Receiver and Components Guarantee This product is guaranteed against faults in manufacture for 12 months from purchase date. Please keep your receipt as proof of purchase. This guarantee is invalid if the product has been abused or tampered with in any way, or not used for the purpose for which it is intended.
- Page 3 BRONCO AIR COMPRESSOR Screw FN014006044 Pressure Gauge FN330006000 Thank you for purchasing this Clarke Oil Free Air Compressor. Before attempting to operate Drain Cock FN022021000 the machine, please read this instruction manual thoroughly and carefully follow all directions Screw FN014006102 given.
- Page 4 17. Electrical or mechanical repairs should only be carried out by a qualified engineer. If problems occur, contact your Clarke dealer. Additionally, please keep these instructions in a safe place for future reference.
- Page 5 FN034128000 fuse carrier, ensure that the correct replacement is used (as indicated by marking or Stator FN316008604 colour code). 4. Replacement fuse covers can be obtained from your local Clarke dealer or most Bearing FN033070000 electrical stockists. Balancing Ring FN027011000...
- Page 6 Air Displacement 7 CFM (200 lpm) NOTE: A quick fit nut is supplied. Corresponding couplings are available from your CLARKE dealer. Alternatively, the quick fit nut may be unscrewed and replaced by a standard type straight hose connector. The hose may then be attached using a hose clip.
- Page 7 Caution Do not attempt any repairs or adjustments if you are uncertain as how it should be done. If you have any queries, please contact your nearest CLARKE dealer, or otherwise telephone CLARKE International, Service Department, on: 020 8988 7400).
- Page 8 If any fault appears, d. Cover adjacent pieces of equipment to prevent overspray. Mask areas the reason for which is not immediately obvious, please contact your local CLARKE of the article not to be sprayed.
Need help?
Do you have a question about the BRONCO 2 OIL FREE and is the answer not in the manual?
Questions and answers