Polaris 9300 Sport Owner's Manual page 7

2. Secure the power cable hook and power supply
hook around the tubes using a screw and hand
tighten with the Torx
Refer to Figure 3.
Figure 3. Install the Power Cable hook and Power
Supply hook
3. Secure the power supply hook using two (2) bolts
and two (2) nuts and tighten with Torx wrench.
Refer to Figure 4.
Figure 4. Secure the hooks
4. Insert the upper tubes (handles) into the bottom
tubes on the cart as shown in Figure 5. Make
sure the upper tubes (handles) are in the proper
orientation and align the screw holes.
5
Figure 5. Install the handles
5. Position the bottom power cable hook as shown
in Figure 6. Place the cable hook plate opposite
the power cable hook. Secure using a screw and
tightening with the Torx wrench. Refer to Figure 7.
wrench (supplied with unit).
®
3
4
7
Figure 6. Position the Bottom Power Cable hook
8
Figure 7. Secure the Bottom Power Cable hook
6. Secure the cable hook plate using two (2) bolts and
two (2) nuts and tighten with Torx wrench. Refer
to Figure 8. The transport caddy is now ready to
use as shown in Figure 9.
9
Figure 8. Secure the Cable hook Plate
Figure 9. Transport and Storage Caddy Assembled
Page 7
6