NetComm CallDirect NTC-6000 Series Quick Start Manual page 8

NetComm Commercial
Step Three: Preparing your computer
Connect one end of the supplied Ethernet cable into a LAN Ethernet port
of your router. Connect the other end of the cable into the LAN port of your
computer. Configure your PC's Ethernet interface to be dynamically assigned
an IP address by doing the following:
Configuring your Network Adapter in Windows
Follow the path Start -> Control Panel -> Network Connections. Right
click Local Area Connection and select Properties to open the
configuration dialogue box of Local Area Connection as below:
8 NTC-6000 Series Quick Start Guide