NetComm CallDirect NTC-6000 Series Quick Start Manual page 7

Step One: Inserting the SIM card
Press the SIM Eject button to eject SIM card bay. Make sure the SIM card is
inserted correctly by inserting the SIM the gold side facing down on the SIM
card bay and in the direction as shown below:
Step Two: Setting up the Cellular Router
Install the supplied antennas to the Cellular Router by screwing them onto
the antenna connectors. Connect the power adapter to the mains and plug
the output into the power jack of the router.
The green Power LED on the panel should illuminate.
NTC-6000 Series Quick Start Guide
NetComm CallDirect Series - NTC-6000 Series
Press the SIM
Eject button
Insert
SIM card
7