Apm - Asus ESC500 G3 User Manual

4.6.8

APM

ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
[Power Key]
Power On By PCIE/PCI [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
4-38
The system goes into ON state after an AC power loss.
The system goes into OFF state after an AC power loss.
The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel /LAN device or other installed PCIE LAN devices.
®
Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel /LAN device or other installed PCIE LAN devices.
®
Disables Wake-On-Ring from generating a wake event.
Enables Wake-On-Ring to generate a wake event.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Chapter 4: BIOS setup