Table of Contents
Advertisement
Post Delay Time [3 sec]
This item appears only when you set the Full Screen Logo item to [Enabled]. This item
allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values
range from 0 to 10 seconds.
This feature will only work when set under normal boot.
Bootup NumLock State [On]
Set the power-on state of the NumLock to [On].
[On]
Set the power-on state of the NumLock to [Off].
[Off]
Wait For 'F1' If Error [Enabled]
[Disabled]
Disables the function.
[Enabled]
The system waits for the <F1> key to be pressed when error occurs.
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be displayed during the boot sequence.
[Keep Current]
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Interrupt 19 Capture [Disabled]
Allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [Enabled]
Setup Mode [EZ Mode]
[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
Allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
The following items appear only when you set the Launch CSM to [Enabled].
ASUS ESC500 G3
The system automatically detects the bootable devices and the add-
on devices.
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows
Disable the CSM to fully support the non-UEFI driver add-on devices
or the Windows
UEFI mode.
®
UEFI mode.
®
4-45
Advertisement
Table of Contents
