Table of Contents
Advertisement
4.6.5
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Intel xHCI Mode [Smart Auto]
[Auto]
[Smart Auto]
[Enabled]
[Disabled]
EHCI Hand-off [Disabled]
[Enabled]
[Disabled]
USB Single Port Control
Allows you to enable or disable the individual USB port.
Refer to section 3.1 Motherboard layout for the location of the USB ports.
4-34
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program. It cannot
be recognized in boot devices list.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Keeps the last operation of xHCI controller in OS during bootup.
Enables the operation of xHCI controller.
Enables the xHCI controller.
Disables the xHCI controller.
Enables the support for operating systems without an EHCI hand-off
feature.
Disables the EHCI Hand-off support.
Chapter 4: BIOS setup
Advertisement
Table of Contents
