Asus ESC500 G3 User Manual page 35

7. Swing the HDD cage inwards back
to its original position.
8. Push in the bay locks to secure the
hard disk drive in place.
9. Connect a 7-pin SATA cable (from
the motherboard SATA port) and a
15-pin power plug (from the power
supply unit) to the rear connectors
of the hard disk drive.
Use either the 15-pin SATA power connector or the legacy 4-pin power
connector. Do not use both types of power connectors to prevent damage to
components.
ASUS ESC500 G3 2-15