Setting A Position Marker - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

INTRODUCTION NAVIGATION
If you want to close the selection menu,
press the ESC button 9 (you will return to the navi menu) or
1
1 select the CONTINUE menu item and
press the right knob/pushbutton ;.
2
If navigation is not active, the navi menu will be displayed again. If navi-
gation is active, you will be switched to the navigation session.
Note: If you change the route options whilst a navigation session is
active, the route will be recalculated. The set route options remain
active until they are changed again.

Setting a position marker

You can save your current vehicle position at any time, even during an active
navigation session. This feature is useful if you notice an interesting location
during your journey and want to return to it at some other point in time.
To set a position marker for your current position,
press the MEN button :.
1
The navi menu is displayed.
2 Highlight the POSITION MARK menu item.
Press the right knob/pushbutton ;.
3
RADIO MODE CD MODE CD CHANGER SETUP
NAVI. MENU
ROUTE OPTION
ROUTE LIST
POSITION MARK
TA
SYMBOLS
INDEX
50
ON
2D