Blaupunkt TravelPilot DX-R4 Operating Instructions Manual page 51

Saving a position marker
After you press the right knob/pushbutton ;, a selection menu opens. You are
now given the option of assigning a name to the position marker or returning to
the menu in which you set the position marker.
If you select the NAME option and enter a name for the position marker, the
name will be automatically stored in the destination memory.
1 Select the NAME menu item.
A speller will open for you to enter the short name.
2 Enter a short name,
keep the right knob/pushbutton ; pressed for longer than two seconds
3
or
symbol and press the right knob/pushbutton ;.
3 select the
The position marker is saved in the destination memory with the short
name that you entered.
If you selected CONTINUE, the menu from which you set the position marker will
be opened without a short name being saved for the position marker.
The position marker is then saved together with the time in the POSITION MARK
memory in the destination memory.
Note: A maximum of five position markers (together with the time)
can be saved in the POSITION MARK memory.
INTRODUCTION NAVIGATION RADIO MODE CD MODE
NEW NAME
_
HOME
TIME: 03:27
ABCDEFGHIJKLMNO
PQRSTUVWXYZ -/.
ÄÖÜ 1234567890
CD CHANGER SETUP
E
51
INDEX