Entering A Destination; Starting Navigation - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

The software is loaded from the CD. The progress is indicated in the
display.
Note: The process of loading the software from the navigation CD
must not be interrupted.

Starting navigation

Press the NAV button < whilst the unit is switched on.
1
The main navigation menu opens. If a navigation session is already ac-
tive, the navigation display will appear.
Before navigation can begin, a DX navigation CD must first be inserted in the
unit and a destination selected.

Entering a destination

The destination can be entered from the destination memory or by entering a
town, a town centre, a road, a junction or house number, or by selecting a spe-
cial destination (e.g. motorway junction, train station, etc.).
Use the right knob/pushbutton ; to select the DEST. ENTRY menu item.
1
Confirm your selection with the right knob/pushbutton ;.
2
Destinations
The following destinations are allowed:
• the town centre or centre of a district in cities,
• a road,
• a junction where two or more roads intersect,
• a house or housing block.
INTRODUCTION NAVIGATION RADIO MODE CD MODE
NAVIGATION
ROUTE GUIDANCE
DEST. ENTRY
DEST. MEMORY
TOURLIST
TRAVEL GUIDE
Main navigation menu
CD CHANGER SETUP
17
INDEX