OPERATING ELEMENTS < button to unlock release CD•C button, switches the panel sound source between radio, (for the Boston C30, Dublin C30, cassette and CD changer (if Montreux C30 and Ontario DJ30 connected) only) AUDIO button, adjusts bass and FMT button, selects the FM...
The optionally available RC 08 infrared We are happy that you decided to pur- remote control unit allows you to con- chase a Blaupunkt car audio system veniently operate the most important and hope that you will enjoy your new system functions from the steering sound system.
Removable front panel remove it. Your new car audio system (Boston When you remove the operating C30, Dublin C30, Montreux C30 and panel, the car audio system will au- Ontario DJ30) has been equipped with tomatically switch off. a removable front panel (release pan- All of the settings will remain el) to protect it against theft.
THEFT PROTECTION Code theft protection Entering the code number To protect your car audio system against Switch on the car audio system. theft, it has been equipped with a four- “CODE” and then “0000” will appear in digit code number. This number has to the display.
Activating/deactivating the LED Switching the car audio code system on/off To visibly indicate that the Augsburg C30 The car audio system can be switched and the Minnesota DJ30 are equipped on/off in a number of ways. with theft protection, you can activate Switching the car audio system on/ the code LED.
SWITCHING ON/OFF VOLUME CONTROL Switching the car audio system on/ Volume control off by pressing 4 The car audio system volume can be Press 4 to switch the car audio adjusted to levels from 0 (off) to 66 (max- system on. imum).
VOLUME CONTROL Mute Switching the beep tone on/off You can reduce the volume of the car For a number of functions you will hear audio system immediately (mute). a beep if you press a key for longer than two seconds, e.g. if you want to store a Press 4 briefly.
LW (AM) wavebands (MW and LW for the frequency with the best re- are not available for the Augsburg C30 ception for the station you have and the Minnesota DJ30). There are tuned into.
FM1, FM2, FMT or either MW or through the “station network”. LW (MW and LW are not available > to tune into the Press for the Augsburg C30 and the Min- next station in the network. nesota DJ30). Note: Tune the radio into the desired sta- To take advantage of this function, you tion.
CD changer mode to that station. TS 6 briefly (for the Augsburg Switching PTY on/off C30 and the Minnesota DJ30 only). Press MENU ?. The storing process will begin. “T-STORE” will appear in the display.
RADIO OPERATION Note: “HICUT 0” indicates that the function is If the radio is not able to find a station switched off; “HICUT 1” means that the broadcasting the program type select- treble will be automatically cut as far as ed, you will hear a beep and “NO PTY”...
TRAFFIC INFORMATION Traffic information Adjusting the volume for traffic announcements Switching traffic information Press MENU ?. priority on/off “MENU” will appear in the display. Press TRAFFIC A. > repeatedly until Press Traffic information priority is activated “TAVOLUME” appears in the dis- when TRAFFIC lights up in the display.
TAPE DECK OPERATION Tape deck operation Fast forward/rewind Fast forward Starting tape deck operation Press FF : until it clicks in. If there is no cassette in the tape deck, “FORWARD” will appear in the display. insert a cassette into the tape deck Fast rewind with the open side facing towards Press FR 9 until it clicks in.
“Accessories” can press MENU ?. be used in combination with the Augs- “MENU” will appear in the display. burg C30, the Boston C30, the Dublin > repeatedly until Press C30 and the Montreux C30. “CDC DISP” appears in the display.
CD CHANGER OPERATION Note: Playing tracks in random order It is possible to adjust the scan time from (MIX) between 5 and 30 seconds in the menu. To play the tracks of the currently Adjusting Scantime selected CD in random order, press 4 (MIX) @ briefly.
CLOCK CLOCK Once you have selected the mode, press MENU ?. Displaying the clock briefly Activating the clock for display Press and hold down MENU ( when the car audio system is ? until the time appears in the dis- switched off play.
TONE Adjusting the tone Switching Loudness on/off Loudness boosts the bass and treble Adjusting the bass when the volume is low to create a more To adjust the bass, press AUDIO natural sound. Press AUDIO (LD) = for more “BASS” will appear in the display. than two seconds.
BALANCE AND FADER EXTERNAL AUDIO SOURCES Adjusting the balance and External audio sources fader In stead of the CD changer it is also possible to connect other external au- Adjusting the balance dio sources to the line output. These To adjust the balance, press GEO sources can include a portable CD play- er, MiniDisc player or MP3 player.
87.5 - 108 MHz MW : 531 - 1602 kHz 153 - 279 kHz (MW and LW are not available for the Augsburg C30 and the Minnesota DJ30) FM frequency response: 30 - 15000 Hz Tape deck Frequency response: 30 - 18000 Hz...