Gas Conversion Kit
Table Of Contents
Parts list .................................................................................... 2
Front Burner ................................................................... 3
Rear Burner.................................................................... 3
Pilot Assembly ................................................................ 3
Operation ................................................................................... 5
Page
General Information
This gas conversion kit contains the necessary components for field
conversion of an approved Montigo fireplace from Natural Gas (NG)
to Liquid Propane (LP).This kit is approved for use with the following
Direct Vent (top and rear vent versions) model(s):
B34-DV-2
The conversion of this appliance must conform with local codes or,
in the absence of local codes, with the American National Fuel Gas
Code, ANSI Z223.1, or the Canadian Installation Code, CAN / CGA
WARNING!
This conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer's instructions
and all applicable codes and requirements of the authority
having jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of
carbon monoxide may result causing property damage,
personal injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer's instructions supplied with this kit.
Parts List
Quantity
Description
1
Pilot orifice
1
Rear burner orifice
1
Front burner orifice
1
Rear burner
1
Front burner
1
Hi/Lo Regulator Kit for the gas control valve
1
Label for rating plate indicating conversion
1
Label for gas control valve indicating conversion
P/N XG0662