Setting Your Changes As The New Default; Restoring All Copy Settings To The Factory Settings; Setting Your Favourites - Brother MFC-8950DW Advanced User's Manual

Setting your changes as the
new default
You can save the copy settings for Quality,
Brightness and Contrast you use most
often by setting them as the default. These
settings will stay until you change them again.
a
Press Copy.
b
Press d or c to choose the setting you
want to change, and then press the new
option.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
d or c to display Set New Default.
Press Set New Default.
d
Press Yes.
e
Press Stop/Exit.
Restoring all copy settings to
the factory settings
You can restore all the copy settings you
have changed to the factory settings. These
settings will stay until you change them again.
a
Press Copy.
b
Press d or c to display
Factory Reset.
Press Factory Reset.
c
Press Yes.
d
Press Stop/Exit.

Setting your favourites

7
You can store the copy settings that you use
most often by setting them as a favourite. You
can set up to three favourites.
a
Press Copy.
b
Choose the copy option and settings
you want to store.
c
Press d or c to display
Favorite Settings.
Press Favorite Settings.
d
Press Store.
e
Press the location where you want to
store your setting for Favorite:1,
Favorite:2 or Favorite:3.
f
Do one of the following:
 If you want to rename your setting,
press
enter the new name (up to 12
characters). Press OK.
7
 If you do not want to rename your
setting, press OK.
g
Press Stop/Exit.
Retrieving your favourite setting
When you are ready to use one of your
favourite set of settings, you can recall it.
a
Press Copy.
b
Press
c
Press the favourite setting you want to
retrieve.
d
Press Start.
Making copies
to delete characters. Then
Favorite.
7
7
7
55