Table of Contents
Advertisement
Turning the Power On/Off
NOTE
Once everything is properly connected (p. 15), be sure to follow the procedure below to turn on their power. If you turn on equipment in the wrong
order, you risk causing malfunction or equipment failure.
1
On
Off
Turning the power on
1.
Press the [Power] switch .
After a brief interval, you'll be able to produce sounds by playing the keyboard.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after turning the unit on is required before it will operate normally.
2.
Use the [Volume] buttons to adjust the volume .
The volume increases when you press the button on the right, and decreases when you press the button on the left.
This will adjust the volume of the speakers if you're using the speakers of the unit, or the volume of the headphones if headphones are connected.
Each volume setting (for speaker or headphone) is saved automatically.
Volume adjustment screen when using speakers
MEMO
The HP508 is designed so that nuances in the dynamics of your playing will be clearly heard even at low volume, and that the sound will remain
clear even at high volume.
Turning the power off
1.
Press the [Power] switch .
The power is turned off.
* If you need to turn off the power completely, first turn off the unit, then unplug the power cord from the power outlet. Refer to "To completely
turn off power to the unit, pull out the plug from the outlet" (p. 3).
WARNING
If you don't want the power to turn off automatically, change the "Auto Off" setting to "Off"!
The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto Off function).
If you do not want the power to be turned off automatically, disengage the Auto Off function (p. 44).
NOTE
• Any settings that you are in the process of editing will be lost when the power is turned off. If you have any settings that you want to keep,
you should refer to "Retaining the Settings Even After Power-off (Memory Backup)" (p. 44) and save your settings.
• To restore power, turn the power on again (p. 14).
• When turning the power on again, you must allow at least five seconds after power-off before you once again turn the power on. If you fail
to allow enough time, the Auto Off function might not be reset, preventing the power from turning on correctly.
2
Softer
Louder
Volume adjustment screen when using headphones
Before You Play
17
Advertisement
Table of Contents
