Roland HP506 Owner's Manual page 13

Selecting the Parts that will Play
Here's how to select the parts that will play.
To select the right-hand part
To select the left-hand part
To select the other parts
To adjust the mute volume of a part
Hold down the button of the part whose volume you want to adjust,
and use the [–] [+] buttons.
Recording/Playback
Here's how to play back or record a
song.
Return to the begin-
Press the [
ning of the song
Play/Stop Press the [
Enter recording-
While stopped, press the [
standby mode
While in recording-standby mode, press the
Record
[
Rewind Press the [
Fast-forward Press the [
To play all songs (all song play)
While holding down the [Song] button, press the [
Stop) button.
To make a new recording
1.
Select the tone that you want to play .
2.
Press the [ ] (Rec) button .
3.
Press the [ ] (Play/Stop) button to start
recording .
4.
Press the [ ] (Play/Stop) button to stop
recording .
30
page
Press the [Right] button so it's lit.
Press the [Left] button so it's lit.
Press the [Accomp] button so it's lit.
28 32
page page
] (Reset) button.
] (Play/Stop) button.
] (Rec) button.
] (Play/Stop) button.
] (Bwd) button.
] (Fwd) button.
29
page
] (Play/
32
page
Disabling the Buttons (Panel Lock)
Hold down the [Right] button until the upper right
of the display shows a " " symbol.
To cancel panel lock
Hold down the [Right] button until the "
To overdub
1.
Select the tone to be played .
2.
Select the song to be dubbed .
3.
Press the [ ] (Rec) button .
4.
Press the [+] button .
5.
Press the button of the part that you want to record,
making it blink .
6.
Press the [ ] (Play/Stop) button to start
recording .
7.
Press the [ ] (Play/Stop) button to stop
recording .
Operation Guide
47
page
" symbol disappears.
35
page
13