Table of Contents
Advertisement
Saving a performance you've recorded
* If you want to save to the USB flash drive (sold separately), connect your USB flash drive to the USB memory port before you continue.
1.
Press the [
] (Fast) button to select "Save . "
Saving will begin.
The recorded performance is saved at the earliest vacant song number.
The song is automatically given a name in this format: "Song nnn, " where "nnn" is the song number.
NOTE
Never turn off the power while "Executing... " is shown in the display.
Saving to a specific memory, song number, or song name
If you press the [Song] button instead of the [
name used for saving.
For details on the procedure, refer to "Saving a Song with the Name You Specify" (p. 40).
Erasing a performance you've recorded
1.
Use the [
] (Slow) button to select "Erase . "
A message will ask you to confirm that you want to erase the song.
2.
Press the [
] (Fast) button to erase the song .
Listening to a performance you've recorded
1.
Press the [
] (Play/Stop) button .
Playback will start from the beginning of the recorded performance.
Overdubbing a Recorded Song
When recording an SMF, you can overdub each part separately. For example, you can record the left-hand and right-hand parts separately, or record
along with a song.
Recording each hand separately
You can separately record your left-hand performance to the [Left] button and your right-hand performance to the [Right] button. You can also
separately re-record each hand afterward.
Getting ready to record
1.
Select the tone that you want to use for performing (p . 18) .
2.
Press the [
] (Rec) button .
The [
] (Rec) button will light, the [
recording-standby mode.
If you decide not to record, press the [
3.
If desired, sound the metronome (p . 26) .
MEMO
If you change the metronome's tempo and time signature, they will be recorded with the song, allowing the metronome to sound correctly during
playback.
] (Fast) button, you'll be able to specify the save-destination memory, song number, and song
] (Play/Stop) button will blink, and the HP508 will enter
] (Rec) button once again.
Practicing
2
33
Advertisement
Table of Contents
