Roland HP506 Owner's Manual page 12

Operation Guide
Adjusting the Song Volume (Song Balance)
By modifying the playback volume of the song, you
can adjust the balance between the song and your
keyboard performance.
To turn song balance on
Press the [Song Balance] button so it's lit.
To adjust the song balance
While holding down the [Song Balance] button, press the [–] [+]
buttons.
Display
The display shows information such as the tone name, song name,
tempo, and time signature.
Tempo Time signature
Selecting Variation Tones/Adjusting the Settings
You can select tone variations or songs, and adjust various settings.
• Holding down the [–] [+] buttons will make the value change
continuously.
• To rapidly increase the value, hold down the [+] button and press
the [–] button.
• To rapidly decrease the value, hold down the [–] button and press
the [+] button.
• To return the value to its default setting, press the [+] and [-] buttons
simultaneously.
12
Repeatedly Practicing a Portion of a Song (AB Repeat)
29
page
Selecting a Song
Measure Tone Name
or
Song Name
Here's how you can make a specific portion of a
song play back repeatedly.
1.
Press the [ ] (Play/Stop) button to play back the
song .
2.
At the beginning of the portion to be repeated, press
the [AB Repeat] button .
3.
At the end of the portion to be repeated, press the [AB
Repeat] button once again .
First, you need to access the song screen; this is where you can
select songs.
To select a song
1.
Press the [Song] button to access the song screen .
Category
Tempo Time signature
2.
Use the [–] [+] buttons to select a song .
To select a song that's saved on the USB flash drive
1.
Press the [Song] button to access the song screen .
2.
While holding down the [Song] button, use
the [–] [+] buttons to select "USB . "
USB flash drive
3.
Use the [–] [+] buttons to select a song .
31
page
28
page
Song Name
Measure