OPERATION AND PROGRAMMING
1. LCD Display and Menu System
The
ProTron
fixture's settings:
Presets (Standard and User Defined)
Fixture Settings
Effects(Chases - preloaded and user defined)
Current Fixture Operational Status
Setting the DMX512 Address
Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired.
Upon power up, the LCD will display the main screen showing menu of ProTron LED. User can use "
and " " to select then enter the desired function menu.
EXIT Button
LEFT Arrow Button
2. LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Upon power up, the LCD will display the main
menu automatically. There are totally 4 menus available including Preset, Chase, Settings and Status. When the
desired menu item is reached, press OK button to display the menu options and to
menu options as required.
To navigate and access menu settings/selections:
Step 1. Make sure unit is powered and turned on.
Step 2. Press the desired button to access menu categories.
Step 3. Use " " and " " arrow buttons to navigate through
the various options and settings.
Step 4. Make changes as desired.
Press OK button to accept changes.
LED Luminaire'
s LCD Display and Menu System provides local control for accessing the
Figure 7: LCD Display and Menu System
ProTron LED
LCD Display
CHECK MARK(OK) Button
RIGHT Arrow Button
navigate and
configure the
following
"
9