Connecting To The Dmx512 Network - Elation ProTron LED User Manual

Table 2: ProTron LED Luminaire (IP65 Rated Models) AC Input Connections
Back of Unit
Figure 3: ProTron LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Dealer or Service Center.

3. Connecting to the DMX512 Network

Basic DMX512 installation consists of connecting multiple ProTron LED Luminaires together (up to 32 luminaires)
in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector
on the first ProTron
connector on the next ProTron LED Luminaire (or DMX512 device to be controlled).
Figure 4: ProTron LED Luminaire DMX512 Input / Output Connections
Note: For more information on DMX512 networking and systems, refer to
page 1. For ProTron LED Luminaire DMX Mapping, refer to
AC Input
LED Luminaire. Another cable runs from the other DMX connector on
DMX512 /
RDM Input
AC Output
DMX512 /
RDM Output
"Additional Resources for DMX512" on
"DMX CONTROL" on page 13
ProTron LED
the first unit to a DMX
.
7