Hard Drive - HP 14 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive cable or bracket.
Description
1-GB, 5400-rpm, 2.5-in
750-GB, 5400-rpm, 2.5-in
500-GB, 5400-rpm, 7.0-mm (for use only in HP 14 and Compaq 14 models)
500-GB, 5400-rpm, 2.5-in (for use only in HP 240 models)
320-GB, 5400-rpm, 2.5-in (for use only in HP 240 models)
Hard drive bracket
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Service door (see
● Top cover (see
To remove the hard drive:
1. Lift the USB board cable to disengage the adhesive that secures it to the hard drive (1)
2. Remove the three Phillips PM2.5×4.5 screws (2) that secure the hard drive to the computer.
3. Lift the hard drive (3) to gain access to the connector.
70 Chapter 4 Removal and replacement procedures
Battery on page 43), and then remove the following components:
Service door on page 49)
Top cover/keyboard on page 55)
Spare part number
676521-005
634250-005
683802-005
669299-005
622643-005
747117-001