Table of Contents
Advertisement
Section 2
General Information
CE Compliance
A custom unit may be required, contact Baldor. Compliance to Directive
89/336/EEC is the responsibility of the system integrator. A control, motor and
all system components must have proper shielding, grounding and filtering as
described in MN1383. Please refer to this manual for installation techniques
for CE compliance.
For a period of two (2) years from the date of original purchase, BALDOR will repair or replace
without charge controls and accessories which our examination proves to be defective in
material or workmanship. This warranty is valid if the unit has not been tampered with by
unauthorized persons, misused, abused, or improperly installed and has been used in
accordance with the instructions and/or ratings supplied. This warranty is in lieu of any other
warranty or guarantee expressed or implied. BALDOR shall not be held responsible for any
expense (including installation and removal), inconvenience, or consequential damage,
including injury to any person or property caused by items of our manufacture or sale. (Some
states do not allow exclusion or limitation of incidental or consequential damages, so the above
exclusion may not apply.) In any event, BALDOR's total liability, under all circumstances, shall
not exceed the full purchase price of the control. Claims for purchase price refunds, repairs, or
replacements must be referred to BALDOR with all pertinent data as to the defect, the date
purchased, the task performed by the control, and the problem encountered. No liability is
assumed for expendable items such as fuses.
Goods may be returned only with written notification including a BALDOR Return Authorization
Number and any return shipments must be prepaid.
Safety Notice
:
This equipment contains voltages that may be as great as 1000 volts!
Electrical shock can cause serious or fatal injury. Only qualified personnel
should attempt the start−up procedure or troubleshoot this equipment.
This equipment may be connected to other machines that have rotating parts
or parts that are driven by this equipment. Improper use can cause serious or
fatal injury.
PRECAUTIONS:
WARNING:
Do not touch any circuit board, power device or electrical
connection before ensuring that power has been disconnected and
there is no high voltage present from this equipment or other
equipment to which it is connected. Electrical shock can cause
serious or fatal injury. Only qualified personnel should attempt the
start−up procedure or troubleshoot this equipment.
WARNING:
Be sure that you are completely familiar with the safe operation of
this equipment. This equipment may be connected to other
machines that have rotating parts or parts that are controlled by this
equipment. Improper use can cause serious or fatal injury. Only
qualified personnel should attempt the start−up procedure or
troubleshoot this equipment.
Continued on next page.
2-1 General Information
Limited Warranty
MN715P
Advertisement
Table of Contents
