End User Configuration - Grandstream Networks HandyTone-496 User Manual

Analog telephone adaptor

Hide thumbs Also See for HandyTone-496:

Table of Contents

HandyTone-496 User Manual

option by accessing the configuration via LAN port. With the WAN side HTTP access enabled,

then get the WAN IP address of the HandyTone-496 through section 5.1 with menu option 02.

The HandyTone-496's Web Configuration page can be accessed by the following URI via

WAN port:

where the HandyTone-IP-Address is the WAN IP address of the HandyTone-496.

NOTE:

• To type IP address into browser to get into the configuration page, please strip out the leading

"0" as the browser will parse in octet. e.g.: if the IP address is: 192.168.001.014, please type in:

192.168.1.14.

6.2.2 End User Configuration

Once this HTTP request is entered and sent from a Web browser, the HandyTone-496 will respond

with the following login screen:

The password is case sensitive and the factory default password for End User and administrator is

"123" and "admin" respectively. Only administrator can get access to the "ADVANCED SETTING"

configuration page.

NOTE:

If you cannot log into the configuration page by using default password, please check with the VoIP

service provider. Most likely the service provider has provisioned the device and configured for you.

After a correct password is entered in the login screen, the embedded Web server inside the

HandyTone-496 will respond with the Configuration page, which is explained in details below.

http://HandyTone-IP-Address

Grandstream Device Configuration

Password

Grandstream Device Configuration

Grandstream Networks, Inc

Table of Contents