Dtmf Tone Dialing With * And; Tone/Pulse Dialing - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Call a Saved Telephone
Number:
1. Access a CO line.
2. Press the Save Last
Number button.
To Output and # DTMF Tones:
*
1. While on an outside call,
press the button, then the
*
# button, if you do not have
the Speed Dial button.
2-12
You can access a CO line by pressing a Line or Pooled Line Grp button,
or by dialing an access code (7 0 1~ 7 0 4 for DK8, 7 0 1 ~ 7 0 8 for
DK16 for a line number; 8 1 ~ 8 4 for DK8, 8 1 ~ 8 8 for DK16 for a line
group; and 9 for the general group or Least Cost Routing).
The system will automatically dial the "saved" number.
DTMF TONE DIALING WITH
and # Dual-tone Multi-frequency (DTMF) tones
You may have to send
*
to some devices or services, such as a voice mail device or computer
output service. If you do not have the Speed Dial button on your
telephone, you must first dial an access code to enable these tones to be
transmitted. DTMF tones are automatically enabled on stations with the
Speed Dial button.
You will now be able to output
0 ~ 9.
This feature disables the Speed Dial feature. Speed Dial will be restored
when you complete the call or place it on hold.

TONE/PULSE DIALING

With some older Central Offices, you may have to make calls using
rotary dial pulses on CO lines. To access remote equipment (such an an
answering machine) requiring Dual-tone Multi-frequency (DTMF) tones
while on these lines, you must set your phone for tone dialing after you
have dialed the telephone number. Your telephone must have a Tone
Dial Select button assigned in system programming to access this
feature.
FEATURE OPERATION
* AND #
and # DTMF tones, as well as digits
*