Calling System Or Station Speed Dial Numbers - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
4. Enter the two-digit code to
which the number will be
linked (9 0 ~ 9 9).
5. Enter the number to be linked.
6. Press the Redial button.
To Call with a Speed Dial button:
1. Access a CO line.
2. Press a SD button.
To Call with a Speed Dial
Access Code:
1. Access a CO line.
2. Press the Speed Dial
button.
3. Dial the 2-digit Speed Dial
access code.
2-10
Only System Speed Dial Codes 9 0 ~ 9 9 may be linked.
You may enter up to 17 digits. (There is space provided in Appendix B to
record Speed Dial codes and their numbers.)
The number will be stored and will be dialed out when the optional linked
System SD button is pressed or the linked System Speed Dial access
code is dialed.

CALLING SYSTEM OR STATION SPEED DIAL NUMBERS

You can call Speed Dial numbers with the touch of a button or by dialing
a brief access code. Speed Dial buttons are assigned to stations in
system programming.
You can access a CO line by pressing a Line or Pooled Line Grp button,
or by dialing an access code (7 0 1~ 7 0 4 for DK8, 7 0 1 ~ 7 0 8 for
DK16 for a line number; 8 1 ~ 8 4 for DK8, 8 1 ~ 8 8 for DK16 for a line
group; and 9 for the general group or Least Cost Routing).
The system will dial the telephone number assigned to the button.
You can access a CO line by pressing a Line or Pooled Line Grp button,
or by dialing an access code (7 0 1~ 7 0 4 for DK8, 7 0 1 ~ 7 0 8 for
DK16 for a line number; 8 1 ~ 8 4 for DK8, 8 1 ~ 8 8 for DK16 for a line
group; and 9 for the general group or Least Cost Routing).
The button can be used if your telephone does not have the Speed
*
Dial button.
Station Speed Dial codes are 1 0 ~ 4 9, and System Speed Dial codes
are 6 0 ~ 9 9.
The system will automatically dial the telephone number assigned to the
dialed code.
FEATURE OPERATION