System Administration - Datetime - D-Link DCS-1000 Manual

System Administration – DateTime
The DateTime menu contains commands for setting DCS-1000's time and date
requirements to provide correct information to users who might be thousands
of miles away in the remote site. There are two options to select from the
DateTime menu bar either Synchronized with Time Server or Set Manually.
Click on "DateTime" in the system administration menu bar and the
DateTime screen will appear as illustrated below:
Click on "Home" to
return to Home Screen
DateTime:
Select "Synchronized with Time Server" and the time will be based on
GMT setting. The time will be synchronized every 10 minutes. This is also
the default setting for DCS-1000.
IP Address:
Enter the IP Address of the Time Server in this field.
Protocol:
Two options of NTP or Time are available for your selection to link with the
Time Server. The default setting is NTP.
TimeZone:
System administrator must select the time zone for the region. Please refer to
the appendix for the time zone selection table.
21