Software Installation; Web Configuration - D-Link DCS-1000 Manual

Internet camera

Hide thumbs Also See for DCS-1000:

Table of Contents

Software Installation

This section describes the Software installation procedure of DCS-1000 for

Web Configuration and IPView Application.

DCS-1000 must be configured through its built-in Web-based

Configuration.

Extensive knowledge of LAN will be helpful in setting up DCS-1000

From the web browser enter the default IP address to access the Home screen

of DCS-1000 to configure your DCS-1000 type "http ://192.168.0.20" in the

address box. The number is the default IP address of your DCS-1000. Press

Enter

Note:

The PC's IP address must correspond with the DCS-1000's IP address in the

same segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two

devices to communicate.

Table of Contents