View Image - Activex Mode - D-Link DCS-1000 Manual

Factory Reset:
A factory reset restarts DCS-1000 and returns all of its settings to their default
values. The Factory Reset panel contains the message "Do you really want to
factory reset this device?" and a YES button. If you do not want to carry out a
factory reset command, exit the panel without clicking YES, otherwise click
on the "YES" icon and factory reset will be initiated.
Note:
The Network must be reconfigured after a Factory Reset.
Once the configuration is completed click on "Home" to return to the Home
screen and select the desired Viewing Image either through ActiveX Mode or
Java Mode as described in the next section.
Then position DCS-1000 to the desired location appropriately for your
purpose. Followed by adjustment of DCS-1000 focus, done manually by
turning the lens clockwise or anti-clockwise to the desire image quality.
Please refer to the appendix for detailed information regarding Adjusting
DCS-1000 Focus and Replacing the Lens.
View Image – ActiveX Mode
To view video images from the browser, click on "View Image – ActiveX
Mode" from the Home screen to access the video images from Internet
Explorer as illustrated below:
Camera Name*
Location**
27
Click on "Home" to
return to Home Screen