D-Link DCS-1000 Manual page 65

Q: What network cabling is required for DCS-1000?
A: DCS-1000 uses Category 5 UTP cable allowing 10 Base-T and 100 Base-
T networking.
Q: Can DCS-1000 be setup as a PC-cam on the computer?
A: No, DCS-1000 is an Internet Camera used only on Ethernet and Fast
Ethernet network.
Q: Can DCS-1000 be connected on the network if it consists of only private
IP addresses?
A: DCS-1000 can be connected to LAN with private IP addresses.
Q: Can DCS-1000 be installed and work if a firewall exists on the network?
A: If a firewall exists on the network, port 80 is open for ordinary data
communication. However, since DCS-1000 transmits image data, the default
port 8481 is also required. Therefore, it is necessary to open port 8481 of the
network for remote users to access DCS-1000.
64