D-Link DCS-1000 Manual page 29

Internet camera

Hide thumbs Also See for DCS-1000:

Table of Contents

Camera Name* - The Camera name will be display when the Camera Name

field is entered in the Web Configuration setting under "System"

Location**- The location of DCS-1000W will be displayed when the

Location field is entered in the Web Configuration settings under "System".

Note:

Please refer to the appendix on how to install ActiveX.

1. Install to the Web Server

2. Install to your Local PC

In the View Image – ActiveX Mode you are allowed two output trigger

options. Just click on the desired selection "ON" or "OFF" to utilize the

options for each of the output triggers (Output 1 trigger or Output 2 trigger).

Note 1:

Output trigger will send a 5V signal to the device connected to the DCS-1000.

A maximum of two devices is permitted to connect to DCS-1000 to utilize the

output trigger function. Please refer to appendix for detailed information.

Note 2:

Administrator has the authority to allow user's the permission to set the output

trigger functions through the setting in the "Users" of System Administration

menu bar.

Table of Contents