Handlebar Switches - Yamaha RAPTOR 700R Owner's Manual

possible.
The electrical circuit of the warning light can be
checked by setting the engine stop switch to
"RUN" and turning the key to "ON". If the warning
light does not come on, and then go off, have a
Yamaha dealer check the electrical circuit.
EBU26720
Engine trouble warning light "
This warning light comes on or flashes when an
electrical circuit monitoring the engine is defective.
When this occurs, have a Yamaha dealer check
the self-diagnosis system.
The electrical circuit of the warning light can be
checked by turning the key to "ON". If the warning
light does not come on, then go off, have a Yama-
ha dealer check the electrical circuit.
EBU18061

Handlebar switches

"
1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
EBU18070
Engine stop switch "ENG. STOP"
Set this switch to "RUN" before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this switch
to stop the engine in an emergency situation. The
engine will not start or run when this switch is set
to "OFF".
4-3
1
2
3
1
2
3
4
5
6
7
8
9
10
11