Yamaha RAPTOR 700R Owner's Manual page 140

the starter. (This will coat the cylinder wall
with oil.)
1
e. Remove the spark plug cap from the spark
plug, and then install the spark plug and
2
the spark plug cap.
4. Lubricate all control cables and the pivoting
3
points of all levers and pedals.
5. Check and, if necessary, correct the tire air
4
pressure, and then block up the ATV so that
all of its wheels are off the ground. Alternative-
5
ly, turn the wheels a little every month in order
to prevent the tires from becoming degraded
6
in one spot.
6. Cover the muffler outlet with a plastic bag to
7
prevent moisture from entering it.
7. Remove the battery and fully charge it. Store
8
it in a cool, dry place and charge it once a
9 month. Do not store the battery in an exces-
sively cold or warm place [less than 0 °C (30
10
°F) or more than 30 °C (90 °F)]. For more in-
formation on storing the battery, see page
11
8-39.
NOTE:
Make any necessary repairs before storing the
ATV.
9-3