Specifications; Adjusting The Rear Shock Absorber Assembly - Yamaha RAPTOR 700R Owner's Manual

the minimum and maximum settings.
NOTE:
Although the total number of clicks of a damping
force adjusting mechanism may not exactly match
the above specifications due to small differences in
production, the actual number of clicks always rep-
resents the entire adjusting range. To obtain a pre-
cise adjustment, it would be advisable to check the
number of clicks of each damping force adjusting
mechanism and to modify the specifications as
necessary.
EWB00370
WARNING
POTENTIAL HAZARD
Suspension components become hot during
operation.
WHAT CAN HAPPEN
You could be burned.
HOW TO AVOID THE HAZARD
Never touch the compression damping force
adjusting screw, rebound damping force ad-
justing screw or oil reservoir with your bare
hand or skin until suspension components
have cooled.
EWB00350
POTENTIAL HAZARD
Improper shock absorber assembly adjust-
ment.
WHAT CAN HAPPEN
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
HOW TO AVOID THE HAZARD
Always adjust the shock absorber assem-
blies on the left and right side to the same
setting.
EBU27950
Adjusting the rear shock absorber
assembly
This shock absorber assembly is equipped with a
spring preload adjusting nut, a rebound damping
force adjusting screw, with a compression damp-
ing force adjusting bolt (for fast compression
damping), and a compression damping force ad-
justing screw (for slow compression damping).
4-17
WARNING
1
2
3
4
5
6
7
8
9
10
11