Clutch Lever; Brake Lever - Yamaha RAPTOR 700R Owner's Manual

EWB00190
1
POTENTIAL HAZARD
Improper adjustment of the speed limiter and
2
throttle.
WHAT CAN HAPPEN
3
The throttle cable could be damaged. Im-
proper throttle operation could result. You
4
could lose control, have an accident or be in-
jured.
5
HOW TO AVOID THE HAZARD
Do not turn the adjusting screw out more
6
than 12 mm (0.47 in). Always make sure the
throttle lever free play is adjusted to 3.0–5.0
7
mm (0.12–0.20 in). (See page 8-24.)
8
EBU18382

Clutch lever

9
The clutch lever is located on the left handlebar
10
and the ignition circuit cut-off system is incorporat-
ed in the clutch lever holder. To disengage the
11
clutch, pull the clutch lever toward the handlebar
grip. To engage the clutch, release the clutch lever.
The clutch lever should be pulled rapidly and re-
leased slowly for smooth clutch operation. (See
page 6-1 for a description of the ignition circuit cut-
WARNING
off system.)
1. Clutch lever
EBU18421

Brake lever

The brake lever is located on the right handlebar.
To apply the front brake, pull the brake lever to-
ward the handlebar grip.
The brake lever is equipped with a position adjust-
ing bolt. To adjust the distance between the brake
lever and the handlebar grip, hold the brake lever
away from the handlebar so it does not contact the
adjusting bolt, loosen the locknut, turn the adjust-
ing bolt, and then tighten the locknut.
4-6