Yamaha RAPTOR 700R Owner's Manual page 103

WHAT CAN HAPPEN
You could be burned by hot fluid and steam
blown out under pressure.
HOW TO AVOID THE HAZARD
Wait for the engine to cool before removing
the radiator cap. Always place a thick rag
over the cap. Allow any remaining pressure
to escape before completely removing the
cap.
1. Place the ATV on a level surface.
2. Remove panel A. (See page 8-7.)
3. Place a container under the engine, and then
remove the coolant drain bolt.
1. Coolant drain bolt
1
8-16
4. Remove the radiator cap.
1
1. Radiator cap
5. Remove the coolant reservoir cap.
6. Disconnect the hose on the coolant reservoir
side, and then drain the coolant from the cool-
ant reservoir.
1
2
3
4
5
6
7
8
9
10
11