Cleaning And Storage; Cleaning - Yamaha RAPTOR 700R Owner's Manual

EBU25860
1
EBU25890

Cleaning

2
Frequent, thorough cleaning of your ATV will not
only enhance its appearance but will improve its
3
general performance and extend the useful life of
many components.
4
1. Before cleaning the ATV:
5 a. Block off the end of the exhaust pipe to
prevent water entry. A plastic bag and
6
strong rubber band may be used.
b. Make sure the spark plug and all filler caps
7
are properly installed.
2. If the engine case is excessively greasy, apply
8
degreaser with a paint brush. Do not apply de-
greaser to the chain, sprockets or wheel ax-
9
les.
3. Rinse the dirt and degreaser off with a garden
10
hose. Use only enough pressure to do the job.
ECB00710
11
CAUTION:
Excessive water pressure may cause water
seepage and deterioration of wheel bearings,
brakes, transmission seals and electrical de-
vices. Many expensive repair bills have result-

CLEANING AND STORAGE

9-1
ed from improper high-pressure detergent
applications such as those available in coin-
operated car washers.
4. Once most of the dirt has been hosed off,
wash all surfaces with warm water and mild,
detergent-type soap. An old toothbrush or bot-
tle brush is handy for hard-to-reach places.
5. Rinse the ATV off immediately with clean wa-
ter and dry all surfaces with a chamois, clean
towel or soft absorbing cloth.
6. Dry the chain and lubricate it to prevent it from
rusting.
7. Clean the seat with a vinyl upholstery cleaner
to keep the cover pliable and glossy.
8. Automotive type wax may be applied to all
painted and chrome plated surfaces. Avoid
combination cleaner-waxes. Many contain
abrasives which may mar the paint or protec-
tive finish. When finished cleaning, start the
engine and let it idle for several minutes.