Yamaha XT225T Owner's Manual page 49

3. Remove the engine guard by re-
moving the bolt.
1
1. Engine guard
2. Bolt
4. Remove the engine oil filler cap
and drain bolt along with the
O-ring, compression spring, and
engine oil strainer, to drain the oil
from the crankcase.
PERIODIC MAINTENANCE AND MINOR REPAIR
2
1. Engine oil filler cap
CAUTION:
When removing the engine oil drain
bolt, the O-ring,
spring, and oil strainer will fall out.
Take care not to lose these parts.
NOTE:
Check the O-ring for damage and re-
place it if necessary.
5. Clean the engine oil strainer with
solvent.
NOTE:
Skip steps 6–11 if the oil filter element
is not being cleaned.
6-13
6. Remove the oil filter element drain
bolt to drain the oil from the oil filter
element.
1
ECA11000
1. Engine oil drain bolt
2. O-ring
compression
3. Compression spring
4. Oil strainer
7. Remove the oil filter element cover
by removing the bolts.
4 3 2 1
2
3
4
1
5
6
7
8
9