Loading Paper In The Bypass Tray - Xerox PHASER 7100 User Manual

Paper and Media
8. Close the tray.
Note: Paper trays extend out the rear of the printer. Ensure that the printer is not too close to the
wall to allow the tray to be inserted fully into the printer.
If no paper change settings are necessary at the control panel prompt, press Back. To change the
9.
size, type, and color, press OK and follow the prompts.

Loading Paper in the Bypass Tray

The Bypass Tray supports the widest variety of paper types. It is intended primarily for small
quantity jobs using special paper. The tray extension provides support for larger paper.
Notes:
• For faster print speeds, load paper 320 mm (12.6 in.) or shorter long-edge feed.
• Load paper longer than 320 mm (12.6 in.) short-edge feed.
• Do not load paper above the maximum fill line. Overfilling can cause paper jams.
1. Open the Bypass Tray and pull out the tray extensions for larger sizes.
46 Phaser 7100 Color Printer
User Guide