Xerox PHASER 7100 User Manual page 103

Clearing Jams at the Fuser
To resolve the error displayed on the control panel you must clear all paper from the paper path.
WARNING:
To avoid burns, do not clear paper jams immediately after printing. The fuser becomes
hot during use.
1. Press the Cover B Release Button and open the cover.
2. To open the fuser cover, pull its tab forward.
3. To open the fuser rollers, lift both green fuser levers to their full-upright position.
Troubleshooting
Phaser 7100 Color Printer
User Guide
103