Call Barring +Clck; Modify Ss Password +Cpwd - Wavecom WMO2 Manual

WCOM/GSM/WMO2/WMO2ATDOC
4.7.2 Call barring
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
4.7.3 Modify SS password
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
This commands allows control of the call barring supplementary service.
Locking, unlocking or querying the status of a call barring is possible for all
or a specific class.
Command Syntax:
AT+CLCK= <fac>, <mode> [, <password> [, <class> ] ]
Response Syntax:
+CLCK: <status> [, <class1>
[ <CR><LF>+CLCK: <status>, <class2>
[ ... ] ]
* <fac>:
"AO", "OI", "OX"
"AI", "IR"
"AG", "AC", "AB"
*<mode>
0 unlocks the facility
1 locks the facility
2 query status
* <class>: see description for +CLCK command (Call Barring)
The combination of different classes in not supported, it will only result in
the activation / deactivation / status request of all classes (7).
Password code must be on 4 digits maximum.
AT+CLCK="AO",1,1234
OK
AT+CLCK="AO",0,5555
+CME ERROR: 16
AT+CLCK="AO",0,1234
OK
This command shall be used by the application to change the
supplementary service password. The command to manage this
functionality is:
Command Syntax:
AT+CPWD=<fac>,<OldPassword>, <NewPassword>
for <fac> see +CLCK command with only "P2" facility added (SIM PIN2).
AT+CPWD="AO",1234,5555
OK
AT+CPWD="AO",1234,5555
+CME ERROR: 16
AT+CPWD="AO",5555,1234
OK
WAVECOM confidential ©
+CLCK
(for <mode>=2 and command successful)
for outgoing calls barring
for incoming calls barring
for all calls barring (<mode>=0 only)
Command valid
Wrong password
Command valid
+CPWD
change Call Barring password
password changed
Change password
wrong password
change password
password changed
WMO2 G900 / G1800 / G1900
Friday 21 May 1999
61