Operator Selection +Cops - Wavecom WMO2 Manual

WCOM/GSM/WMO2/WMO2ATDOC
4.3.2 Operator selection
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
To select the operator, three possibilities exist:
1- The mobile enters the manual mode, and then try to find an operator
which is indicated by the application. If it finds and registers correctly, then
the mobile stays in idle mode.
2- The mobile enters the automatic mode, and then try to find the home
operator. If it finds and registers correctly, then the mobile stays in idle
mode ; if not, the mobile search automatically another network.
3- The mobile enters the manual/automatic mode, and the try to find an
operator which is indicated by the application (like in manual mode) . If this
attempt fails the automatic mode is entered.
To force an attempt to select and register a network operator, the
application must send the following command:
Command syntax:
Response syntax:
The parameters values are the following ones:
<mode>:
0: automatic (default value)
1: manual
3: set only <format>
4: manual / automatic (<oper> shall be present), if automatic selection
fails, automatic mode is entered.
<format>: format of <oper> field
0: long format alphanumeric <oper>
2: numeric <oper> (default value)
<oper>: operator identifier (MCC/MNC in numeric format only for operator
selection)., long alphanumeric format can be up to 16 characters
long (see appendice 16.10} } for operator names description, field is
"Name")
AT+COPS?
+COPS: 0,2,20801
OK
AT+COPS=?
+COPS: (2,20801), (0,20810)
OK
AT+COPS=1,2,20810
+CME ERROR: 3
AT+COPS=1,1,20810
+CME ERROR: 4
AT+COPS=0,2
OK
AT+COPS=3,0
OK
AT+COPS?
+COPS: 0,0,"F Itineris"
OK
AT+COPS=1,0,"F SFR"
+CME ERROR: 3
AT+COPS=4,0,"F SFR"
OK
AT+COPS?
+COPS: 0,0,"F Itineris"
OK
WAVECOM confidential ©
+COPS
AT+COPS=<mode>, [<format> [ , <oper> ] ]
OK or +CME ERROR: <err>
Ask for current plmn
Home PLMN is France telecom Itineris
Ask for PLMN list
Home PLMN is France Telecom
SFR network has been seen
Ask for registration on SFR network
Failed
Ask for registration on SFR network
Wrong parameters
Ask for registration on home network
Succeed
Ask for setting alphanumeric format
Succeed
Ask for current plmn
Home PLMN is France telecom Itineris
Ask for registration on SFR network
Failed
Ask for registration on SFR network in
manual/automatic mode
Command succeed
Ask for current plmn
Home PLMN is France telecom Itineris !
So the attempt to register on SFR Network
has failed but the automatic selection on
Home PLMN has succeed.
WMO2 G900 / G1800 / G1900
Friday 21 May 1999
36