Advanced Operation; Headset Operation - VTech Vonage IP 8100-2 Manual

Headset Operation

Your IP 8100-2/8100-3 handset is equipped with a 2.5mm headset jack for use
with an optional accessory headset for handsfree operation. If you choose to
use the headset option, you must obtain an optional accessory headset, which
is compatible with the IP 8100-2/8100-3.
To purchase a headset, visit us on the web at www.vtechphones.com or
call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm headset, locate the headset jack on the IP
8100-2/8100-3 handset. Connect the plug on the headset cord to the jack (under
a small rubber flap) on the cordless handset. The plug should fit securely. Do not
force the connection.
NOTE
:
• Whenever a compatible headset is
connected to the cordless handset,
the microphone on the handset will be
muted. This is done to limit the effect
of background noise.
• When a compatible headset is con-
nected to the cordless handset, your
speakerphone feature will be disabled.
To use your speakerphone feature,
simply disconnect the headset from
the handset.
Belt Clip
The IP 8100-2/8100-3 is also equipped
with a detachable belt clip. Align the pins
on the inside edge of the clip with the
notches on the sides of the handset. The
belt clip should snap securely into place.
Do not force the connection.
26