Table of Contents
Advertisement
Setup
Installation Without A Router
IP 8100-2/8100-3
Handset 1 & 2
NOTE:
The IP 8100-2/8100-3 is expand-
able up to a total of 4 handsets. Uses
model IP 811 (sold separately)
Warning: Do not route the ethernet cable to outdoors, and ensure that you are
using a safety approved DSL or Cable modem with proper electrical
S
TEP 1
Unplug the power cord from your Cable or DSL modem (the device your ISP
provided which provides high-speed Internet). Make sure that you turn your
computer off and that you do NOT plug in your IP 8100-2/8100-3 broadband
telephone until instructed to do so.
Helpful Hint: The modem should be powered off for at least 10 minutes. If it is
turned off for a shorter period of time, it may "remember" old information that will
prevent it from working properly.
INTERNET
DSL or Cable Modem
WAN Port
9
PC/LAN Port
IP 8100-2/8100-3
Base Unit
isolation.
PC
Advertisement
Table of Contents
Need help?
Do you have a question about the Vonage IP 8100-2 and is the answer not in the manual?
Questions and answers