Call Forward; Conference Call; Base Operation - VTech Vonage IP 8100-2 Manual

Handset Operation

Call Forward

• While on an external call, one handset (HS1)
can forward it to any other handset:
• Press INT on HS1, it will display:
• Enter the handset number you wish to for-
ward, HS1 will display:
HS X can press ON to answer the call.
•
NOTE: If HS X does not respond in about 30
seconds, the external call will be returned to
HS1 and the display will show:
If the returned call is not answered within 30
seconds, the external call will end automati-
cally.

Conference Call

It is possible to establish a conference between
two handsets and the external line.
If a handset already has a connection to the
external line, and another handset goes off-
hook, a conference is immediately established.
Both handsets will show:

Base Operation

From the base unit, you can use the PAGE key
to locate the handsets.
• When the handset is in idle, press PAGE.
The handsets will display:
• To end the page at the handset, press ON,
SPEAKER or any dialing keys.
• To end the page at the base, press PAGE.
ENTER HANDSET #
CALL FORWARDED
CALL BACK
CONF.
17
00:00:25
BASE IS
PAGING