Adjustment; Steering Friction; Throttle Grip - TOHATSU MFS 6A3Z Owner's Manual

46

ADJUSTMENT

1. Steering friction

MF, EF type
1 The steering friction can be adjusted
in accordance with your preference
by turning the steering adjust bolt.
2
3
4
5
Note
6
The steering adjustment bolt is used to
adjust the friction load of the steering,
but not to fix the steering. Excess
7
tightening of the adjustment bolt may
cause damage to the swivel bracket.
8
EFT, EP and EPT type
9
10
11
(a)
Heavier
12
Adjust this lever to achieve the
desired steering friction (drag) on
the tiller handle. Move lever towards
13
(a) to tighten friction and move lever
towards (b) to loosen friction.
14
Steering adjust bolt
Lighter
Heavier
(b)
Lighter

2. Throttle grip

MF, EF and EFT type
The turning force of the throttle grip
can be adjusted with a throttle adjust
screw.
Lighter
Heavier
WARNING
!
Do not overtighten the throttle grip or
remote control tensioner or it could result
in difficulty of movement resulting in the
loss of control causing an accident and
could lead to severe injury.