Stopping - TOHATSU MFS 6A3Z Owner's Manual

34

4. Stopping

MF, EF and EFT type
1
2
3
4
Stop switch
① Turn the throttle grip to the slow
5
position.
② Put the shift lever in the Neutral
position.
6
Run the engine for 2-3 minutes at
idling speed if it has been running
at full speed.
7
③ Push the stop switch to stop the
engine or release the stop switch
lock.
8
!
9
● Do not shift into Reverse during
planing, or control will be lost leading
to serious personal injury, boat
10
may swamp, and/or hull may be
damaged.
● Do not shift into Reverse during
11
cruising, or control may be lost,
falling down or causing passenger(s)
to be thrown overboard. Leading to
serious personal injury, and steering
12
system and/or shifting mechanism
may be damaged.
13
14
Stop Switch Lock
WARNING
ENGINE OPERATION
EP and EPT type
OFF
Stop switch lock
(N)
① Put the shift lever in the Neutral
position and run the engine for 2-3
minutes at idling speed if it has
been running at full speed.
② Turn the main switch key to the
OFF position.
Notes
● After stopping the engine, close the
air vent screw on the tank cap.
● Disconnect the fuel connector of
the engine or the fuel tank.
● Disconnect the battery cord of the
EF, EP, EFT or EPT type engine, if the
engine will not be used for more than
3 days.
ON
START