TOHATSU MFS 6A3Z Owner's Manual page 43

ENGINE OPERATION
EP type
■ Setting shallow water drive
① Stop the engine.
② Shift the outboard into forward.
③ Tilt the outboard up to one of the
shallow water drive positions.
WARNING
!
Do not tilt up or down outboard motor
when swimmer(s) or passenger is near
to prevent them from being caught
between outboard motor body and
clamp bracket in case the outboard
motor body falls.
WARNING
!
When tilting up outboard motor with fuel
joint for over a few minutes, be sure to
disconnect fuel hose or close fuel cock,
or fuel may leak, potentially catching fire.
Note
For U.S.A. market only
High altitude :
When engine operates at high altitude engine may need to have a high altitude kit installed.
Otherwise, operating the engine at high altitude may increase its emissions and decrease
fuel efficiency and performance. Please see "LIMITED WARRANTY INFORMATION" for
more detail.
■ Releasing shallow water drive
① Stop the engine.
② Tilt the outboard up to the tilt
③ Gently lower the outboard.
Shallow
water
drive
position
Do not tilt up outboard motor while
engine operates, or no cooling water
may be fed, leading to engine seizure
due to overheating.
release position.
CAUTION
!
43
1
2
3
Tilt
release
position
4
5
6
7
8
9
10
11
12
13