TOHATSU MFS 6A3Z Owner's Manual page 59

INSPECTION AND MAINTENANCE
Replacing gear oil
WARNING
!
● Be sure that outboard motor is secured
to transom or service stand, or
accidental drop or fall of outboard motor
could lead to severe personal injury.
● Be sure to lock outboard motor if
it is tilted up, or accidental fall of
outboard motor could lead to severe
personal injury.
● Do not go under outboard motor
tilted up and locked, or accidental
fall of outboard motor could lead to
severe personal injury.
① Remove the oil plugs (upper and
lower), and completely drain the
gear oil.
② Insert the oil tube nozzle into the
lower oil plug hole, and fill with
gear oil by squeezing the oil tube
CAUTION
!
Do not reuse oil plug gasket. Always
use new gasket and tighten oil plug
properly to prevent entry of water into
lower unit.
Oil･plug･(Upper)
Oil･plug･(Lower)
until oil flows out from upper plug
hole.
Oil plug (Upper)
③ Install the upper oil plug, and then
remove oil tube nozzle and install
the lower oil plug.
Notes
If water in the oil, giving it a milky
colored appearance. Contact your
dealer.
Notes
Use genuine gear oil or the
recommended one (API GL-5: SAE
#80 to #90).
Required volume: approx. 320 ml.
59
Oil･plug･(Upper)
Oil･plug･(Lower)
10
11
12
13
1
2
3
4
5
6
7
8
9