TOHATSU MFS 6A3Z Owner's Manual page 37

ENGINE OPERATION
MF, EF type
① Stop the engine.
② Shift the outboard into neutral.
③ Raise the engine to the tilt up position.
④ Change the thrust rod position.
⑤ Gentry lower the outboard.
Higher
EP type
① Stop the engine.
② Shift the outboard into forward.
③ Raise the engine to the tilt release
position(b).
④ Change the preset knob position.
⑤ Gently lower the outboard.
Preset Knob
Thrust Rod
Lower
a
Transom angle settings
Tilt release position
b
WARNING
!
● Do not put hand or finger in between
outboard motor body and clamp
bracket when adjusting trim angle to
prevent injury in case the outboard
motor body falls.
● Unsuitable trim position can cause
loss of control of boat.
When testing a trim position, run
boat slow initially to see if it can be
controlled safely.
37
1
2
3
4
5
6
7
8
9
10
11
12
13