Setting The Viewfinder - Sony HDCAM HDW-700A Operation Manual

4-7-6 Setting the Viewfinder

Use the VF SETUP page of the OPERATION menu to select items
related to the viewfinder.
1
Set the VF DISP switch to MENU.
2
Turn the MIC/MENU knob until the VF SETUP page appears, and
push the MIC/MENU knob.
ZEBRA: Turn the zebra display on or off and select the zebra
display level.
ZEBRA 1 (70%): Adjust the level of the zebra (70%) display
ZEBRA 2 (100%): Adjust the level of the zebra (100%) display
VF SCAN: Select the VF scan mode (16:9 or 4:3). This item has
the same function as the DISPLAY/ASPECT switch.
3
Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
4
Turn the MIC/MENU knob to change the desired setting, and push
the MIC/MENU knob.
The question mark (?) changes back to the arrow (→) to confirm the
setting.
5
To continue setting other items, repeat steps 3 and 4.
6
To end menu operations, turn the VF DISP switch to ON.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen.
Chapter 4 Adjustments and Settings for Recording
4 4
4-47